Keynote Speakers

David Bourell
• Director Laboratory for Freeform Fabrication
• The University of Texas at Austin, United States

Christoph Leyens
• Managing Director
• Fraunhofer Institute of Materials and Beam Technology, Germany

Milan Brandt
• Director Centre for Additive Manufacturing
• Advanced Manufacturing Precinct
• RMIT University, Australia

Ali Bonakdar
• Advanced Manufacturing Technology Lead
• Siemens Canada

Hannes Gostner
• Director Research and Development
• EOS, Germany

David Bourell
Director, Laboratory for Freeform Fabrication
The University of Texas at Austin, Texas, United States

Christoph Leyens
Managing Director
Fraunhofer Institute of Materials and Beam Technology, Germany

Milan Brandt
Director Centre for Additive Manufacturing
Advanced Manufacturing Precinct
RMIT University, Australia

Ali Bonakdar
Advanced Manufacturing Technology Lead
Siemens Canada

Hannes Gostner
Director Research and Development
EOS, Germany
Conference Program
8:00 AM | Breakfast | |
8:30 AM | Conference Opening | Location: Great Hall South Santa Ono, UBC President and Vice Chancellor James Olson, Dean of the UBC Faculty of Applied Science Ehsan Toyserkani, HI-AM Network Director |
|
8:40 AM | Keynote: Metals for Additive Manufacturing
| Location: Great Hall South David Bourell Temple Foundation Professor Director of Laboratory for Freeform Fabrication, The University of Texas at Austin | |
9:20 AM | Session 1: Advances in Additive Manufacturing I Chair: Steve Cockcroft | Location: Great Hall South |
|
9:20 AM | Presentation 1: Business Case for Additive Manufacturing in Serial Production
Alexander Boehm KSB, Germany |
|
9:40 AM | Presentation 2: Low Cost, Medium-Speed Stereovision for Spatter Tracking in Powder Bed Fusion
Eric MacDonald Youngstown State University, United States |
|
10:00 AM | Presentation 3: Efficient parameter development strategy of tool steel materials for Laser Additive Manufacturing
Gregor Graf*, Manuela Leoni**, Tobias Muller, Jorg Fischer-Buhner, Daniel Beckers*, Sven Donisi*, Frederik Zanger**, Volker Schulze** *Rosswag GmbH, Germany |**Karlsruhe Institute of Technology, Germany |
|
10:20 AM | Morning Tea, Poster and Exhibition Viewing | |
10:40 AM | Keynote: Innovative Aerospace and Space Structures made by Additive Manufacturing
| Location: Great Hall South Christoph Leyens Managing Director, Fraunhofer Institute of Materials and Beam Technology, Germany |
|
11:20 AM | Session 2: Advances in Additive Manufacturing II Chair: Daan Maijer | Location: Great Hall South |
|
11:20 AM | Presentation 4: Optimisation of process parameters for in-situ alloyed titanium by selective laser melting
Igor Yadroitsev*, Ina Yadroitsev*, Pavel Krakhmalev**, Anton du Plessis***, Eric Newby*, Dean Kouprianoff* *Central University of Technology, South Africa|**Karlstud University, Sweden | ***Stellenbosch University, South Africa |
|
11:40 AM | Presentation 5: Novel Repair Strategy using Additive Manufacturing to Address Severe Foreign Object Damage on Ti Alloy Fan Blades
Priti Wanjara*, Javad Gholipour*, Kosuke Watanabe**, Koji Nezaki** *National Research Council of Canada-Montreal |**IHI Corporation, Japan |
|
12:00 PM | Presentation 6: Development of metal slurry three-dimensional printing system based on maskless projection method
Cho-Pei Jiang*, Shinn-Liang Chang** *National Taipei University of Technology, Taiwan|**National Formosa University, Taiwan |
|
12:20 PM | Lunch | |
1:00 PM | Poster Viewing | Location: Great Hall South - Exhibition Viewing | Location: Great Hall North | |
2:00 PM |
Keynote: Mastering AM Freedom
| Location: Great Hall South Hannes Gostner Director Research and Development, EOS, Germany |
|
2:40 PM | Session 3: Material Development I Chair: Paul Bishop | Location: Great Hall South |
Session 4: Advanced Process Modeling I Chair: Damiano Pasini | Location: Room 2301 |
2:40 PM | Presentation 7: Effect of powder attributes on microstructure and mechanical properties of 3D-printed Al10SiMg alloy using Laser Powder Bed Fusion technique
Vahid Fallah, Qingshan Dong, Mark Gallermeault Queen's University, Canada |
Presentation 11: Thermo-Mechanical Numerical Modelling of Selective Laser Melting for Prediction of Residual Stress
Jean-Sebastien Cagnone, Jean-Philippe Marcotte, Marjan Molavi-Zarandi, Florin Ilinca, Kabanemi Kalonji Kabaa National Research Council of Canada-Boucherville |
3:00 PM | Presentation 8: Development of modified A8 and S7 tool steel powders for additive manufacturing by LPB-AM
Denis Mutel, Carl Blais Universite Laval, Canada |
Presentation 12: Topology Optimization of Support Structures for Laser Powder-Bed Fusion Based on the Inherent Strain Method
Zhidong Zhang*, Osezua Ibhadode*, Pouyan Rahnama*, Ali Bonakdar**, Ehsan Toyserkani* *University of Waterloo, Canada |**Siemens, Canada |
3:20 PM | Presentation 9: Studying the impact of particle morphology on powder spreading and laser powder bed fusion characteristics to maximize the process productivity
Salah Eddin Brika*, Morgan Letenneurm*, Christopher Alex Dion**, Vladimir Brailovski* *ETS Montreal, Canada |**PyroGenesis Additive, Canada |
Presentation 13: A fast and part-level numerical simulation of temperature field in selective laser melting process
Zhibo Luo, Fiona Zhao McGill University, Canada |
3:40 PM | Presentation 10: Selective electron beam melting of Al-Cu-Mg alloy: Processability and Characterization
Mohammad Saleh Kenevisi, Feng Lin Tsinghua University, China |
Presentation 14: Fast-to-run predictive model for thermal fields during Additive Manufacturing
Meet Upadhyay, Daan Maijer, Steve Cockcroft The University of British Columbia, Canada |
4:00 PM | Afternoon Tea, Poster and Exhibition Viewing | |
4:20 PM | Session 5: Process Monitoring and Control I Chair: Mihaela Vlasea | Location: Room 2301 |
Session 6: Novel AM Processes and Products I Chair: Vahid Fallah | Location: Great Hall South |
4:20 PM | Presentation 15: In-line melt pool monitoring of laser powder-bed fusion
katayoon Taherkhani*, Zheng Ma*, Esmat Sheydaeian*, Ali Ghodsi*, Martin Otto**, Christopher Eischer**, Ehsan Toyserkani* *University of Waterloo, Canada |**EOS, Germany |
Presentation 19: Machine Learning Aided Optimization of Conformal Cooling Channel
Zhenyang Gao, Fiona Zhao McGill University, Canada |
4:40 PM | Presentation 16: Modelling and Identification of Electron Beam Deflection System
Scott Parks, Zekai Murat Kilic, Ralf Edinger, Yusuf Altintas The University of British Columbia, Canada |
Presentation 20: Hybrid additive manufacturing and casting processes for non ferrous alloys
Axelle Sabouraud, Artitra Biswas, Abdoul-Aziz Bogno, Hani Henein, Ahmed Qureshi University of Alberta, Canada |
5:00 PM | Presentation 17: Cost Effective Real-Time Thermal Dynamics Modeling in Laser Materials Processing
Lucas Botelho, Amir Khajepour University of Waterloo, Canada |
Presentation 21: Mechanical and functional performance of porous bone replacement implants
Asma El Elmi*, David Melancon**, Meisam Asgari*, Liu Lu*, Damiano Pasini* *McGill University, Canada |**Harvard University, United States |
5:20 PM | Presentation 18: In-situ Sensing and Measurement for Quality Control in Metal Additive Manufacturing: Review and Future Directions
Thomas Lehmann*, Tonya Wolfe**, Hani Henein*, Ahmed Qureshi* *University of Alberta, Canada | **InnoTech Alberta, Canada |
Presentation 22: Surface finishing of titanium and nickel-based laser powder bed-fused components: abrasive flow machining versus electrochemical polishing
Neda Mohammadian*, Victor Urlea*, Clement Bouland*, Sylvain Turenne**, Vladimir Brailovski* *ETS Montreal, Canada |**Ecole Polytechnique de Montreal, Canada |
5:40 PM | Poster Viewing | Location: Great Hall South - Exhibition Viewing | Location: Great Hall North | |
5:40 PM | Scientific Advisory Committee Meeting | Location: Robert H. Lee Boardroom, Alumni Centre | |
6:40 PM | Conference Dinner | Location: Gallery & Patio Restaurant, AMS Nest, Level 4 |
8:00 AM | Breakfast | |
8:30 AM | Keynote: Additive Manufacturing Landscape in Australia
| Location: Great Hall South Milan Brandt Director Centre for Additive Manufacturing Advanced Manufacturing Precint, RMIT University, Australia | |
9:10 AM | Session 7: Material Development II Chair: Ahmed Qureshi | Location: Room 2301 |
Session 8: Advanced Process Modeling, Monitoring and Control Chair: Fiona Zhao | Location: Great Hall South |
9:10 AM | Presentation 23: Fabrication of Rene 41 Parts with Laser Powder Bed Fusion
Sila Atabay*, Kevin Plucknett**, Mathieu Brochu* *McGill University, Canada |**Dalhousie University, Canada |
Presentation 27: Geometric deviations of laser powder bed fused AlSi10Mg components: Numerical Predictions versus Experimental Measurements
Floriane Zongo*, Charles Simoneau**, Anatolie Timercan*, Antonie Tahan*, Vladimir Brailovski* *ETS Montreal, Canada|**SimuTech Group, Canada |
9:30 AM | Presentation 24: Particle decoration: A method for developing new material for Additive manufacturing
Ehsan Marzbanrad, Yahya Mahmoodkhani, Ehsan Toyserkani University of Waterloo, Canada |
Presentation 28: Melt Pool Geometry Modeling and Monitoring via In-Situ Vision System for Powder Fed Laser Fusion Process
Deniz Sera Ertay, Josh van Houtum, Mihaela Vlasea University of Waterloo, Canada |
9:50 AM | Presentation 25: Electrostatic Atomisation of Metals
Bilal Bharadia, Aziz Bogno, Hani Henein University of Alberta, Canada |
Presentation 29: Temperature fluctuations at boundary points in Laser Powder Bed Fusion
Emre Ogeturk, Mary Wells University of Waterloo, Canada |
10:10 AM | Presentation 26: Implementation of the Kitagawa-Takahashi approach for prediction of fatigue limit of Inconel 625 components containing intentionally-seeded defects
Jean-Rene Poulin, Patrick Terriault, Vladimir Brailovski ETS Montreal, Canada |
Presentation 30: Design of a test artefact to evaluate critical design features for Ti-6Al-4V parts in electron-beam melting additive manufacturing (EBAM)
Gitanjali Shanbhag, Mihaela Vlasea University of Waterloo, Canada |
10:30 AM | Morning Tea, Poster and Exhibition Viewing | |
10:50 AM | Session 9: Advanced Process Modeling II Chair: Marjan Molavi-Zarandi | Location: Great Hall South |
Session 10: Novel AM Processes and Products II Chair: Vladimir Brailovski | Location: Room 2301 |
10:50 AM | Presentation 31: Microscale interaction between the laser and metal powder in powder-bed additive manufacturing: conduction mode versus keyhole mode
Hongze Wang, Yu Zou University of Toronto, Canada |
Presentation 36: Investigating residual stress characteristics for selected direct energy deposition process settings: P420 steel single bead deposition on mild steel
Jill Urbanic*, Navid Nazemi** *University of Windsor, Canada |**AMG Metal Inc., Canada |
11:10 AM | Presentation 32: A Predictive System for Manufacturability Analysis of Laser Powder Bed Fusion Process
Ying Zhang, Fiona Zhao McGill University, Canada |
Presentation 37: Evaluation of additive manufacturing for repair and remanufacturing purposes
Fatih Sikan*, Priti Wanjara**, Javad Gholipour**, Mathieu Brochu* *McGill University, Canada |**National Research Council of Canada-Montreal |
11:30 AM | Presentation 33: Thermal fluid modeling for melt pool generation of Ti6Al4V powder bed in the electron beam additive manufacturing
Eiko Nishimura, Steve Cockcroft, Daan Maijer, Farzaneh Farhang-Mehr The University of British Columbia, Canada |
Presentation 38: Laser powder bed fusion of AlSi10Mg for fabrication of an aluminum transmission pump housing
Lisa Brock, Hamed Asgari, Mihaela Vlasea University of Waterloo, Canada |
11:50 AM | Presentation 34: Normative benchmark design and preliminary geometric quality results for selective laser melting process
Baltej Singh, Marc Secanell, Ahmed Qureshi University of Alberta, Canada |
Presentation 39: Direct Laser Deposition of Ti–5Al–5V–5Mo–3Cr Alloy
Xinjin Cao*, Alexander Bois-Brochu**, Javad Gholipour* *National Research Council of Canada |**Centre de metallurgie du Quebec, Canada |
12:10 PM | Presentation 35: Numerical Analysis of Melt Pool Geometry in Laser Powder-Bed Fusion of Hastelloy X
Shahriar Imani*, Adhitan Rani Kasinathan*, Zhidong Zhang*, Yahya Mahmoodkhani*, Usman Ali*, Ali Keshavarzkermani*, Ehsan Toyserkani*, Ali Bonakdar** *University of Waterloo, Canada |**Siemens, Canada |
Presentation 40: Predicting Defects in 3D Printed Lattice Structures
Ken Nsiempba, Ehsan Toyserkani University of Waterloo, Canada |
12:30 PM | Lunch | |
1:10 PM | Keynote: Industrialization of Additive Manufacturing: A Journey from Fundamental Research to Production
| Location: Great Hall South Ali Bonakdar Advanced Manufacturing Technology Lead, Siemens Canada | |
1:50 PM | Session 11: Material Development III Chair: Hani Hanein | Location: Great Hall South |
Session 12: Advanced Process Modeling and Novel AM Processes Chair: Priti Wanjara | Location: Room 2301 |
1:50 PM | Presentation 41: Correlating the columnar grain structure with the anisotropic mechanical response of Hastelloy X produced by laser powder-bed fusion
Ali Keshavarzkermani*, Reza Esmaeilizadeh*, Shahriar Imani*, Hamid Jahed Motlagh*, Norman Zhou*, Ali Bonakdar**, Ehsan Toyserkani* *University of Waterloo, Canada |**Siemens, Canada |
Presentation 46: Tool path related process planning challenges for direct energy deposition systems
Bob Hedrick*, Jill Urbanic** *CAMufacturing Solutions Inc., Canada |**University of Windsor, Canada |
2:10 PM | Presentation 42: Graphene Nanocellulose Composites for 3D Printed Electrodes
Taylor Morrison, Hani Naguib University of Toronto, Canada |
Presentation 47: Selective laser melting of graphene-reinforced aluminum matrix composites for electrical batteries
Mostafa Yakout, M. A. Elbestawi McMaster University, Canada |
2:30 PM | Presentation 43: Application of fast cooling calorimetry in AM
An Fu*, Pierre Hudon*, Paul Bishop**, Mathieu Brochu* *McGill University, Canada |**Dalhousie University, Canada |
Presentation 48: Influence of Operating Parameters during Plasma Transferred Arc Additive Manufacturing on Carbide Concentration of 70wt% Ni-WC Metal Matrix Composite Components
Dylan Rose*, Tonya Wolfe**, Hani Henein*, Leijun Li* *University of Alberta, Canada |**InnoTech Alberta, Canada |
2:50 PM | Afternoon Tea, Poster and Exhibition Viewing | 3:10 PM | Presentation 44: Selective Laser Melting of Copper, Aluminum, and Copper-Aluminum Alloy
Hao Kun Sun, Yu Zou, Gisele Azimi University of Toronto, Canada |
Presentation 49: Integration of Physically-based Analytical Model and Statistically-driven Empirical Model for Multi-objective Optimization of Laser Powder-Bed Fusion
Yuze Huang, Hamed Asgari, Mohammad Ansari, Behrad Khamesee, Ehsan Toyserkani University of Waterloo, Canada |
3:30 PM | Presentation 45: Laser Powder Bed Processing of Aluminum Powders Containing Iron and Nickel Additions
Greg Sweet*, Jon Hierlihy*, Ian Donaldson**, Mathieu Brochu***, Paul Bishop* *Dalhousie University, Canada |**GKN, Canada |***McGill University, Canada |
Presentation 50: Progress in Applying Fused Filament Fabrication to Metal Matrix Composites (MMC)
Nancy Bhardwaj*, Hani Henein*, Tonya Wolfe** *University of Alberta, Canada |**InnoTech Alberta, Canada |
3:50 PM | Closing and Awards | Location: Great Hall South Andrew Szeri, UBC VP Academic and Provost |
|
4:00 PM | Board of Directors Meeting | Location: Robert H. Lee Boardroom, Alumni Centre |
Theme 1: Material Development |
Poster 1: Innovative surface finishing methods for reducing internal and external surface roughness of metal additive manufacturing parts
Haniyeh Fayazfar, Mihaela Vlasea, Ehsan Toyserkani University of Waterloo, Canada |
Poster 2: The contribution of moisture from cellulosic filters in LPBF AM
Aniruddha Das, Mathieu Brochu McGill University, Canada |
Poster 3: Laser DED cladding of H13 tool steel and elemental equivalents
Owen Craig, Kevin Plucknett Dalhousie University, Canada |
Poster 4: A Novel Binder Jetting Process To Fabricate Functionally Graded Nanocomposites For Hygroscopic Sensing And Actuation
Xuechen Shen, Hani Naguib University of Toronto, Canada |
Poster 5: Mechanical Properties of Additively Manufactured Tessellated Metamaterial Design Configurations
Anastasia Wickeler, Hani Naguib University of Toronto, Canada |
Poster 6: Improving Surface Finish of Low-Cost Irregular Powders in Laser Powder-Bed Fusion
Seung Ho Jeong, Sagar Patel, Allan Rogalsky, Mihaela Vlasea, Adrian Gerlich, Mary Wells University of Waterloo, Canada |
Poster 7: Reactive sintering for post-processing of binder-jet additive manufactured metal matrix composites
Pablo Enrique, Norman Zhou, Ehsan Toyserkani University of Waterloo, Canada |
Poster 8: Characterization of commercial Mo powders and their laser powder bed fusion additive manufacturing behavior
Tejas Ramakrishnan, Eileen Ross Espiritu, Mathieu Brochu McGill University, Canada |
Poster 9: Elevated-temperature tensile and creep properties of laser powder bed-fused IN625 components
Alena Kreitcberg*, Karine Inaekyan*, Sylvain Turenne**, Vladimir Brailovski* *ETS Montreal, Canada |**Ecole Polytechnique de Montreal, Canada |
Poster 10: Rapid Solidification of Al-Cu Eutectic
Daniela Diaz, Abdoul-Aziz Bogno, Jonas Valloton, Hani Henein University of Alberta, Canada |
Poster 11: Effect of rapid solidification on microstructure and properties of Al-Si alloys
Daniela Diaz, Hani Henein, Abdoul-Aziz Bogno University of Alberta, Canada |
Poster 12: Processing of Ti-64 by Laser Powder Fed Additive Manufacturing
Nick Gosse*, Ian Donaldson**, Kevin Plucknett*, Paul Bishop* *Dalhousie University, Canada |**GKN, Canada |
Poster 13: Binder Jet Printing of Low Cost Tool Steel Powders
Ryen Ley*, Ian Donaldson**, Paul Bishop* *Dalhousie University, Canada |**GKN, Canada |
Poster 14: Rapid Solidification of Al-Si-Sc Alloy
Akankshya Sahoo*, Abdoul-Aziz Bogno*, William Hearn**, Hani Henein* * University of Alberta, Canada |**Chalmers University of Technology, Sweden |
Poster 15: Correlating the columnar grain structure with the anisotropic mechanical response of Hastelloy X produced by laser powder-bed fusion
Ali Keshavarzkermani*, Reza Esmaeilizadeh*, Shahriar Imani*, Hamid Jahed Motlagh*, Norman Zhou*, Ali Bonakdar**, Ehsan Toyserkani* *University of Waterloo, Canada |**Siemens, Canada |
Theme 2: Advanced Process Modeling |
Poster 16: Evaluation of Residual Stresses induced in Laser Powder-Bed Fusion Additive Manufacturing Process: Finite Element Simulation and Experimental Investigation
Marjan Molavi-Zarandi*, Ali Bonakdar**, Ramin Sedaghati*** *National Research Council of Canada-Boucherville |**Siemens, Canada |***Concordia University |
Poster 17: Control of density and microstructure in laser powder bed-fused components using a combination of melt pool modeling and design of experiment approaches
Morgan Letenneur, Alena Kreitcberg, Vladimir Brailovski ETS Montreal, Canada |
Poster 18: Adaptive trajectory planning for direct energy deposition using tri-dexel model
Farzaneh Kaji*,**, Vadim Kozhevnikov*,**, Ehsan Toyserkani* **University of Waterloo, Canada |**Promation, Canada |
Poster 19: Mechanics of additively built porous biomaterials
Ahmed Moussa*, Asma El Elmi*, David Melancon**, Damiano Pasini* *McGill University, Canada |**Harvard University, United States |
Poster 20: Topology Optimization of Structures under Design-Dependent Pressure Loads
Pouyan Rahnama, Osezua Ibhadode, Zhidong Zhang, Ehsan Toyserkani University of Waterloo, Canada |
Poster 21: Design for Additive Manufacturing: Topology Optimization of a Mechanical Assembly
Osezua Ibhadode, Pouyan Rahnama, Ehsan Toyserkani University of Waterloo, Canada |
Poster 22: Study on fracture mechanism of Ti-6Al-4V EBM manufactured under different loading conditions through a hybrid
Mohammad Shaterzadeh, Marcilio Alves University of Sao Paulo, Brazil |
Poster 23: Numerical model of Al-33wt%Cu eutectic growth during Impulse Atomization
Jonas Valloton, Aziz Bogno, Hani Henein University of Alberta, Canada |
Poster 24: Residual stress and distortion in Electron Beam Additive Manufacturing of Ti-6Al-4V build plates
Pegah Pourabdollah, Farzaneh Farhang-Mehr, Steve Cockcroft, Daan Maijer The University of British Columbia, Canada |
Poster 25: Meso-scale thermal, elastic and plastic strain evolution in PB-EBAM
Asmita Chakraborty, Farzaneh Farhang-Mehr, Daan Maijer, Steve Cockcroft The University of British Columbia, Canada |
Poster 26: Residual deformation and stress measurement
Farhad Rahimi, Farzaneh Farhang-Mehr, Daan Maijer, Steve Cockcroft The University of British Columbia, Canada |
Poster 27: Beam/powder/melt pool interaction; experimental validation
Arman Khobzi, Farzaneh Farhang-Mehr, Daan Maijer, Steve Cockcroft The University of British Columbia, Canada |
Theme 3: Process Monitoring and Control |
Poster 28: Literature survey of laser ultrasound imaging techniques applicable to defect detection in metal additive manufactured parts
Alexander Martinez-Marchese, Ehsan Toyserkani University of Waterloo, Canada |
Poster 29: Leveraging Keyhole Mode Melting Models in Laser Powder Bed Fusion
Sagar Patel, Mihaela Vlasea University of Waterloo, Canada |
Poster 30: Detection of internal defects and surface cracks in additively manufactured conductive parts by eddy current technique
Heba Farag, Behrad Khamesee, Ehsan Toyserkani University of Waterloo, Canada |
Poster 31: Modelling of Powder Spreading to Optimize Compaction Consistency
Alexander Groen, Mihaela Vlasea, Kaan Erkorkmaz University of Waterloo, Canada |
Poster 32: Anisotropic finite element modeling of an aluminum alloy made by additive manufacturing
Henrique Ramos*, Rafael Santiago*, Marcilio Alves**, Peter Theobald***, Shwe Soe*** *Federal University of ABC, Brazil |**University of Sao Paulo, Brazil |***University of Cardiff, UK |
Poster 33: Investigation of binder deposition and infiltration strategies for binder jetting
Marc Wang, Ken Nsiempba, Mihaela Vlasea University of Waterloo, Canada |
Poster 34: Current-controlled Line Energy – Porosity Relation for EBAM of Ti-6Al-4V
Frederik Lindenau*, Chad Sinclair*, Heinz Voggenreiter*,** *The University of British Columbia, Canada |**University of Stuttgart, Germany |
Theme 4: Novel AM Processes and Products |
Poster 35: Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners
Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski ETS Montreal, Canada |
Poster 36: Patient-specific endoprostheses for limb sparing in dogs: design, manufacturing, in vitro study and clinical trial
Anatolie Timercan*, Bernard Seguin**, Yvan Petit*, Bertrand Lussier***, Vladimir Brailovski* *ETS Montreal, Canada |**Colorado State University, Colorado |***Universite de Montreal |
Poster 37: Predicting Defects in 3D Printed Lattice Structures
Ken Nsienpba, Ehsan Toyserkani University of Waterloo, Canada |
Poster 38: Magnetic Levitation and Suspension Systems for Additive Manufacturing Techniques
Parichit Kumar, Behrad Khamesee, Ehsan Toyserkani University of Waterloo, Canada |
Poster 39: An Analytical Model for Interaction of Laser Beam and Powder Stream in a Coaxial Nozzle for Directed Energy Deposition
Mohammad Ansari, Yuze Huang, Alexander Martinez-Marchese, Ehsan Toyserkani University of Waterloo, Canada |
Poster 40: Processing Conditions of 17-4 PH using Plasma Transfer Arc Additive Manufacturing
Sandy El Moghazi*, Hani Hanein*, Tonya Wolfe**, Leijun Li* *University of Alberta, Canada |**InnoTech Alberta, Canada |
Poster 41: Nanoindentation studies of dual-phase Ti-6Al-2Zr-1Mo-1V alloys made by additive manufacturing
Zhiying Liu, Yu Zou University of Toronto, Canada |
Poster 42: Dip Coating of Tool Steel H13 with TiC-Ni3Al Cermet Suspensions, and Their Subsequent Laser Cladding
Zhila Russell, Kevin Plucknett Dalhousie University, Canada |
Poster 43: Geometrical accuracy of NiTi shape memory parts produced by laser powder bed fusion
Saeed Khademzadeh, Paolo Bariani, Simone Carmignato University of Padova, Italy |
Poster 44: Porous Scaffolds based on Triply periodic minimal surface (TPMS) manufactured by different additive manufacturing methods
Xin Zhang*, Rizhi Wang*, Dawei Wang** *The University of British Columbia, Canada |**Southern University of Science and Technology, China |
